FINIISH AND COMBINATION BLADES
The combination blade can be use during fresh concrete for floating and finishing at the same time. These blades are to increase the productivity in a short time while getting your desired finish.
The finishing blades are for the purpose of finishing the concrete slab finish. Since the purpose of these blades are for the finishing, the surface area targeted are more concentrated and in a higher speed. The finishing blades are for sealing off of the concrete finish ready for its final curing.
These blades, the combination and finishing blades, can be made from stainless steel and plastic.
PANS
Float pans, also known as float disk, are circular attachments to the power trowel bottom and will be clipped to the trowel blades. Float blades or float pans are used for the initial step of polishing of the fresh concrete. These discs are widely used as they can give a flatter appearance of the floor and it can increase the productivity during floating.
Float pans have clip angles for the purposes of attaching it to the blades. For the attachment, lay the pan flat to a surface, turn on the power trowel and use a slow rotation for the blades to engage with the float pans. Once the pan is clipped to the blades, it can be used for floating.
The Float pans & blades sizes vary and are sized to fit the power trowel. The diameter can range from 24 to 48 inches and have a gauge from 10 to 12.
Product Features
Advantage:
We pride ourselves on providing superior products and customer service. Experience the difference our innovative products make by choosing our power trowel and pan for your next concrete finishing project.